Prosoft MVI56-PDPMV1通讯模块

Prosoft MVI56-PDPMV1 通讯模块是一款 Profibus DP V1 主通信模块，具备以下特性：

品牌与制造商：由 ProSoft Technology 开发，与 ControlLogix 平台兼容 。

通信协议：支持 Modbus/TCP、Ethernet/IP、DeviceNet 等多种工业以太网协议 。

数据传输速率：支持从 9600 bps 至 12 Mbps 的数据传输速率 。

最大节点数：在 Profibus DP V1 网络中，最多可连接 125 个从属设备 。

端口配置：具有两个端口，包括配置/调试端口和 RS485 光学隔离端口 。

工作温度：模块可在 -20°C 至 60°C 的温度范围内工作 。

防护等级：达到 IP65 等级，适应多种工业环境 。

背板电流负载：在 5V DC 时为 800 mA，24V DC 时为 3 mA 。

存储温度：-40°C 至 85°C 。

抗冲击性：工作时 30 g，不工作时 50 g 。

抗振性：5 g，10 Hz 至 150 Hz 。

相对湿度：5% 至 95% (无冷凝) 。

LED 指示灯：包括就绪、运行、错误和令牌指示灯，用于监控模块状态 。

配置端口：提供 RJ45 (DB-9M，配电缆) 用于配置端口 (CFG) 。

CIPConnect®：模块支持使用 Rockwell Automation 以太网接口，通过以太网路由与 ProSoft Configuration Builder 和 FDT comDTM 通信 。

MVI56-PDPMV1 模块适用于多种工业应用，包括电力和配电、石油化工、水和燃气应用、SCADA 和 DCS 应用等 。

The Prosoft MVI56-PDPMV1 communication module is a Profibus DP V1 main communication module with the following features:

Brand and Manufacturer: Developed by ProSoft Technology and compatible with the ControlLogix platform.

Communication protocol: Support Modbus/TCP, Ethernet/IP, DeviceNet and other industrial Ethernet protocols.

Data transfer rate: Support data transfer rates from 9600 bps to 12 Mbps.

Maximum number of nodes: Up to 125 slave devices can be connected in a Profibus DP V1 network.

Port configuration: There are two ports, including a configuration/debugging port and an RS485 optical isolation port.

Operating temperature: The module can operate in the temperature range of -20°C to 60°C.

Protection level: IP65, suitable for a variety of industrial environments.

Backplane current load: 800 mA at 5V DC and 3 mA at 24V DC.

Storage temperature: -40°C to 85°C.

Impact resistance: 30g when working, 50g when not working.

Vibration resistance: 5 g, 10 Hz to 150 Hz.

Relative humidity: 5% to 95% (non-condensing).

LED indicators: Include ready, running, error, and token indicators to monitor module status.

Configuration port: RJ45 (DB-9M with cable) is provided for configuration port (CFG).

CIPConnect® : Module supports communication with ProSoft Configuration Builder and FDT comDTM via Ethernet routing using Rockwell Automation Ethernet interface.

The MVI56-PDPMV1 module is suitable for a variety of industrial applications, including power and distribution, petrochemical, water and gas applications, SCADA and DCS applications.